This type of cleaning system is typically used decentralized in the production to wash parts continuously directly in the production line, so that handling of the parts between machining centers and cleaning systems is avoided. This is especially relevant for mass production of uniform parts in connection with punching, turning and similar production methods.
Throughput washers can be used both for washing between different stages of the production, where subsequent production processes require that the parts are clean, or as a final cleaning before packaging or quality control of the parts.
All our conveyor cleaning systems are offered with spray washing, rinsing and drying depending on the task and can be offered with a wide range of extra options such as filter systems. We have two types of throughput or conveyor washers, which are found in this category where the washing process is basically the same but the handling of the parts itself is different:
Beltline is our robust belt-conveyor washer with spray washing, where the parts are placed on a belt, a chain or an parts fixture during the cleaning process depending on the task. This cleaning system is suitable for most types of parts and handling is gentle during the cleaning process. Beltline is also offered with ultrasonic cleaning if necessary to clean complex parts.
Drumline is our robust drum washer with spray washing, where the parts move into a drum, which is usually fed directly from the machining centers. The cleaning system is offered both with stainless drum, plastic drum or a specially developed drum depending on the task. A drum washer is distinguished by being able to wash a large volumes of parts, but the range of parts suitable for a drum washer is more limited.
If you want to hear more about our cleaning systems with conveyor and drum then you are welcome to contact us for further information, otherwise you can read more about this type of cleaning system under each product.
We have delivered a wide range of different industrial cleaning systems to remove oils and lubricants from machined parts and maintenance components. We can clean almost any surface made of metal, plastic, glass etc.
Which type of industrial cleaning equipment such as ultrasonic cleaning or spraywash depends on the specific needs of the customer.
We effectively remove corrosion using our neutral waterbased cleaning chemical combined with ultrasonic cleaning equipment. This solution removes both old and new rust from maintenance parts etc.. The solution is very environmental friendly and effective.
We have great expertise in removing paint from a large variation of parts. Typically we are removing paint from hooks, fixtures, pumps, painting pistols and nozzles.
Our solutions can remove both liquid and hardened paint which is mainly done with ultrasonic cleaning.
We have a expertise in removing both hardened and liquid epoxy from parts. Which in some cases can be a hard job depending on the type of epoxy.The key to removing epoxy effectively is having the right cleaning chemical and machine for the type of parts and form of epoxy that is being removed.
We have an extensive knowledge in ultrasonic cleaning of components after 3D-printing, and offer both standard- and customized solutions for the application. We have a complete range of both cleaning machines and water-based cleaning chemicals for removing epoxy and support materials.
We manufacture cleaning machines for rubber-parts in both the medical- food- and metalindustry. Every machine is customized for the user to meet the specific requirements of the application.
We have a wide expertise in cleaning both large- and small components after thermal deburring. During the deburring process a oxide-layer is created on the parts which has to be removed in the production process.
This layer is most efficiently removed using an ultrasonic cleaning system, and specialized chemicals optimized for the application.
Efficiently clean the parts after wire-spark cutting, removing the surface layer after the process and achieving the original metal-surface from before the process. The cleaning process is efficiently carried out using ultrasonic cleaning and a special developed cleaning chemical for this purpose.
The Drumline spray washing system is designed for cleaning of high quantities and is very efficient due to the rotation of the parts inside the machine.
– Spray washing
– Spray rinsing
– Hot air drying