Endless Bandfilter TME
Our Endless Bandfilte TME is produced in Denmark and developed for continuous filtration of process fluids and oil without the use of filter paper or similar.
This type of bandfilter, with its robust construction, does not use filter paper but instead has a fine mesh band that is available down to 100 microns for filtering the liquid. The band, which is advanced with a gear motor, is kept clean with either compressed air or brushed depending on the customer’s preference and is supplied with a level sensor, electric control and is available in 6 sizes depending on the task.
- WastewaterOur filter systems are used for the treatment of waste water in the municipal sector and are ideal for pre-treatment of waste water and process fluids before ultrafiltration etc.
- Plastic industrySuitable for companies in the processing of plastic parts, where you often meet the same requirements as in the metal industry and oil, cooling lubricants and plastic shavings are not accepted at the same time as high demands on the surface.
- Metal industryThis solution is suitable for companies within turning, milling, stamping and other processing in the metal industry to remove oil, cooling lubricants, grease, polishing paste, soot and metal shavings and ensure a consistently high quality in the surface.
Produced with a stainless-steel frame, cabinet and conveyor which makes it ideal for most applications.
It is including electric control box for the sensors, gearmotor and alarms
The hydrostatic band filter is produced in accordance with the European Machine Directive.
"Deep-bed" construction means that we filter large quantities of process fluid in a small area and at the same time have efficient filtration and low operating costs.
The self-cleaning conveyor system is using either brushes or high-pressure air to continuously remove the contamination from the band. The system is almost maintenance free.
Its with chain-conveyor construction with a fine-mesh band which is filtrating the fluids during the process. Its very good for heavy-duty contamination.
Its with integrated overflow channel to avoid the process fluids reaching a too high level
Secures reliable distribution of the process fluids inside the bandfilter.
The solution for filtering large particles from the process fluid.
The belt filter does not use filter paper, which means constantly low operating costs.
|Model||TME 40||TME 80||TME 180||TME 240||TME 360||TME 550|
|Flow capacity||216 l/min||450 l/min||1000 l/min||1500 l/min||2000 l/min||3000 l/min|
|Protection grade||IP 54||IP 54||IP 54||IP 54||IP 54||IP 54|
|Control voltage||24 VDC||24 VDC||24 VDC||24 VDC||24 VDC||24 VDC|
|Power supply||3×230/400V – 50 hz.||3×230/400V – 50 hz.||3×230/400V – 50 hz.||3×230/400V – 50 hz.||3×230/400V – 50 hz.||3×230/400V – 50 hz.|
|Filter area||0,4 m2||0,8 m2||1,8 m2||2,4 m2||3,6 m2||5,5 m2|