Experience fantastic results with this high pressure cleaning cabin for workshops

Manual partswasher

Stainless steel manual spraying cabin with high-pressure cleaning at 80 bar which effectively cleans the parts from oil, grease and dirt. The right solution for workshops and manufacturing companies for maintenance and repair of tools and components.

The heated liquid with environmentally friendly soap combined with the high-pressure pump gives a fantastic result. The machine is including heating, temperature setting and level sensor in a stainless steel cabin. Inside the cabin, it is equipped with a high-pressure gun, window cleaning and a compressed air gun to blow off the parts.

Contact us and test the equipment in our showroom.

Who uses this product?

  • Workshops
    Service, maintenance and repair of trucks, cars, bikes, tools or similar tasks benefits greatly from this type of cleaning system, which is very common for this application.
  • Molding and tooling
    Whether you’re working with Injection molding tools or stamping tools, they need to be cleaned as a part of maintenance and service during production. Read more about this product, which is very common for exactly this application.
  • Metal industry
    Efficiently removes metal chips, oils and contaminants from process fluids used in machining centers. Its possible to filtrate both oils and water-based lubricants.
100% stainless steel construction
The manual partswasher with a cabinet made of AISI 304 stainless steel.
Prepared for extraction
Its prepared for installation of extraction if customer needs this

Cleaning of front window
Manual partswasher is including a front window with air-blowing to ensure optimal vision when blasting
High pressure airgun
Manual partswasher has a high pressure airgun in the cabin which is used to blow-off parts after washing.

Light inside cabinet
LED lights are mounted in the cabin for easier operation
Heating elements
The best results are obtained by heating the liquid and adding soap.

Level sensor
Manual partswasher is supplied including level sensor for protection of pump and heater
CE-machine directive
Manufactured in accordance with the European Machine directive
Technical data
Volume (est.)40 L75 L90 L
Work area (LxWxH)700x550x450 mm950x700x450 mm1200x800x450 mm
Max. part weight70 / 150 kg70 / 150 kg70 / 150 kg
Power supply230V+N+PE – 50 hz.230V+N+PE – 50 hz.230V+N+PE – 50 hz.
High pressure air3-6 bar3-6 bar3-6 bar